OPTI-pro Mid W-2 Wall Mount 24 Port
24 port mid-size wall mount panel designed for or intra-floor (Riser room) patching and splicing building, OSP cable building entrance or customer premise demarcation.
One of our best-selling products, the OPTI-pro W-2 Mid patch panel is the all-around panel. It is perfect for distributing ISP fiber in riser rooms of up to 48 fibers with LC connectors. The panel incorporates knock-out entrances and can be utilized for mid-strip applications. The bulkhead partition is removable for splice-only applications. It may be used as an OSP entrance panel where wall space is at a premium. With its smaller footprint, the W-2 Mid can also be used to terminate cables in customer premises.
| Dimensions: | 330mm W x 320mm H x 102mm D |
| Mounting: | Standard wall mount with sheet metal screws |
| Loaded panel includes: | (1) Aluminum splice tray with clear plastic cover with (1) 12F Heat shrink holder |
| Available Accessories: | Pre-loaded with angled adaptor strips SC/LC/ST; MM or SM; UPC or APC |
| Pretested 4M fiber fan outs – .09/125µm, 50/125µm, 62.5/125µm |
Compliances
- RoHS – Restriction of Hazardous Substances
- TIA-569-B – Commercial Building Standard for Telecommunications Infrastructure pathways and spaces
- E1A-310-D – Requirements for Cabinets, Racks, Panels, and Associated Equipment
Rack Mount
OPTI-pro Single R-1 
OPTI-pro Double R-2 Wall Mount
OPTI-pro Mini W-1 
OPTI-pro Mid W-2 
OPTI-pro Large W-3 
OPTI-pro Multi 24-WMUX Accessories
Aluminum splice tray with clear plastic cover for up to 12 fibers. The splice chip incorporates unique expansion joints that prevents the chip from curling when fully loaded with heat shrinks, all designed in house.
Angled bulkhead adaptors to maintain optimum fiber bend radius.
- Available Single Mode, Multimode 62.5 µm, Multimode 50 µm.
- Available for SC and LC connectors in UPC or APC finishes.
Fan-out Pigtails
- Available 6 fiber 9/125 µm, 62.5/125 µm, or 50/125 µm with SC connectors in UPC or APC
- Available 12 fiber 9/125 µm, 62.5/125 µm or 50/125 µm with LC connectors in UPC or APC
- Tested for Insertion Loss and Return Loss
- Without Kevlar or cable boot to allow strand length adjustment
