Opti-Pro Multi 24-WMUX Wall Mount MUX
Unique 24 Port 2 Door Wall Mount panel enables splicing/patching on Utility side as well as Customer side. Includes MUX support bracket for high density customer distribution.
The 24-WMUX accommodates up to 48 fibers with LC connectors. Actually 2 panels in one, it features splice tray supports on each side of the bulkhead partion to allow cross patching in-between. Also includes MUX support bracket for higher density distribution, which may be easily removed. This panel is the only one of its kind.
| Dimensions: | 400mm W x 360mm H x 102mm D |
| Mounting: | Standard wall mount with sheet metal screws |
| Loaded panel includes: | (1) Aluminum splice tray with clear plastic cover with (1) 12F Heat shrink holder |
| Available Accessories: | Pre-loaded with angled adaptor strips SC/LC/ST; MM or SM; UPC or APC |
| Pretested 4M fiber fan outs – .09/125µm, 50/125µm, 62.5/125µm |
Compliances
- RoHS – Restriction of Hazardous Substances
- TIA-569-B – Commercial Building Standard for Telecommunications Infrastructure pathways and spaces
- E1A-310-D – Requirements for Cabinets, Racks, Panels, and Associated Equipment
Rack Mount
OPTI-pro Single R-1 
OPTI-pro Double R-2 Wall Mount
OPTI-pro Mini W-1 
OPTI-pro Mid W-2 
OPTI-pro Large W-3 Accessories
Aluminum splice tray with clear plastic cover for up to 12 fibers. The splice chip incorporates unique expansion joints that prevents the chip from curling when fully loaded with heat shrinks, all designed in house.
Angled bulkhead adaptors to maintain optimum fiber bend radius.
- Available Single Mode, Multimode 62.5 µm, Multimode 50 µm.
- Available for SC and LC connectors in UPC or APC finishes.
Fan-out Pigtails
- Available 6 fiber 9/125 µm, 62.5/125 µm, or 50/125 µm with SC connectors in UPC or APC
- Available 12 fiber 9/125 µm, 62.5/125 µm or 50/125 µm with LC connectors in UPC or APC
- Tested for Insertion Loss and Return Loss
- Without Kevlar or cable boot to allow strand length adjustment
